GPS 1100
This entry-level receiver is great for a number of applications where sub-meter accuracy is not needed. At 2 meter WAAS correction it's great for: - Yield monitor applications
     - General mapping with a handheld computer
     - Replacing a radar gun on equipment

AgGPS 114
The 114 is a sub-meter receiver that allows for L-Band or WAAS subscriptions making it a versatile platform for many applications.  It's "all in one" receiver and antenna design make it great for soil sampling and data collection.

AgGPS 132
This receiver has been the mainstay in GPS technology for many years.  It's ability to use all three differential correction signals (L-Band subscription, WAAS, and Coast Guard beacon) allow its use almost anywhere.  With scrolling buttons on the receiver, changes can be made while in the field.

AgGPS 252
This high end versatile receiver is capable of WAAS, OmniStar XP, OmniStar HP, and RTK signal use.  This receiver is mainly used with Trimble's AutoPilot system, but can also be used with an AgGPS 50 lightbar and EZ-Steer system.

AgGPS 332
This is Trimble's next generation receiver.  It has been called the "Ultimate Choice" for its ability to gain differential correction from all available sources today (Coast Guard beacon, WAAS, OmniStar XP/HP, and RTK) only by upgrading the antenna.  The AgGPS 332 is a great choice for someone starting out, but thinking of the upgrade potential in the future.

AgGPS 50 Lightbar
The AgGPS 50 lightbar system is the lightbar component of the EZ-Guide Plus system.  Trimble has designed the lightbar to be used with other "third-party" receivers that a producer might already own.  The only requirement is that the receiver has a NMEA output and can connect to the lightbar.

AgGPS EZ Guide Plus
The EZ-Guide Plus lightbar guidance system is the first system to combine crystal-clear guidance LEDs, a sunlight-readable LCD screen and integrated GPS, all with the slimmest profile of any lightbar on the market. The portability, ease of setup and use, and upgrade ability of this system makes it a favorite for many different operations.

AgGPS EZ Guide 252
The AgGPS EZ-Guide 252 system combines the popular EZ-Guide Plus lightbar guidance system with the AgGPS 252 multi-function receiver. The EZ-Guide 252 system can be used as an alternative to row markers for guidance during planting. This system can easily be upgraded to Autopilot and RTK GPS performance for sub-inch accuracy.

PF Advantage
The PF Advantage is a multi-purpose monitor well suited to yield monitoring. The PF Advantage will display and record yield, moisture, combine speed, grain flow, acres, distance, wet bushels, dry bushels, and acres per hour, plus more. It organizes data by year, farm, field, grain, and load for easy identification. Data can be transferred to a computer to print summaries of all fields.

Insight
The Insight monitor is the next generation console with a 10.4 inch color touch screen. The color screen allows you to monitor yield and moisture at harvest and see your maps being generated in real-time. Understand what's happening in the field while you are still harvesting with the on screen colored maps. The console is designed for ease of use, from setup and calibration, to summary preparation.

EZ-Steer
EZ-Steer is a revolutionary development in assisted steering technology. The EZ-Steer system uses GPS guidance from the AgGPS EZ-Guide Plus lightbar and turns the steering wheel automatically, greatly reducing driver fatigue and allowing you to better oversee the implement or spray booms to improve the job quality. Setup takes only a 30 minutes and doesn't require tying into hydraulic systems. This system can be installed on any approved agricultural vehicle with power steering. This includes tractors, articulated tractors, sprayers, and combines. It is especially good for operators with older equipment who want better accuracy than foam markers. This system can be upgraded with the addition of the AgGPS 252 receiver and OmniSTAR HP correction.

AgGPS Autopilot
For operators demanding repeatability and 1 inch absolute accuracy, Autopilot is the answer. Autopilot connects to your tractor's hydraulic power steering system and automatically steers the tractor perfectly for straight, center pivot, curves or headlands. Simply engage the AgGPS Autopilot and oversee its operation-operators can accurately stay on line all day, ensure minimum overlaps and have more time for infield applications such as listing, planting, and cultivating. There are many options for consoles and accuracy with these systems.

Insight Direct Command
The Insight Direct Command system allows operators to control application rates directly from the Insight display, eliminating the need for a separate in-cab controller. The Direct Command system connects directly to most common brands of flow meters and control valves and will work with up to 10 boom valves for either manual or automatic boom section control. With Direct Command comes an exciting feature called AutoSwath. AutoSwath automatic boom control allows the Insight display to automatically shut off individual boom sections as the sprayer enters into and out of already applied areas, which is especially useful around point rows, waterways and field borders where over-application is most likely to occur. AutoSwath also works on applicators that do not have boom control such as anhydrous toolbars, spreaders, and air carts.

Direct Command is also available for granular applications.  The Insight will apply and log data for up to five products at one time.  Variable rate prescriptions are read into the machine in several different formats including TGT, IRX, and shapefiles.  As with the liquid version, AutoSwath control is available for granular as well.